Dry cabinets SD+ series technical overview

The SD+ Series

Technical Data for SD+ Desiccant Dry Cabinets

Features

  • Ext. Dimensions (WHD)
  • Int. Dimensions (WHD)
  • Capacity
  • Weight
  • Power Consumption
  • No of Shelves
SD+ Series - SD Plus 302-22

SD+ 302-22

  • Ext. dimensions (WHD) 500 x 1127 x 640 mm
  • Int. dimensions (WHD) 490 x 1124 x 594 mm
  • Effective capacity 320 L
  • Weight 68 kg
  • Power consumption 24 W/h
  • Number of shelves 7
SD+1104 dry storage cabinet
SD+ 1104-22
  • Ext. dimensions (WHD) 1200 x 1840 x 658 mm
  • Int. dimensions (WHD) 1190 x 1533 x 630 mm
  • Effective capacity 1139 L
  • Weight 155 kg
  • Power consumption 48 W/h
  • Number of shelves 5
SD+1106 dry storage cabinet
SD+ 1106-22
  • Ext. dimensions (WHD) 1200 x 1840 x 658 mm
  • Int. dimensions (WHD) 1190 x 1533 x 630 mm
  • Effective capacity 1139 L
  • Weight 155 kg
  • Power consumption 48 W/h
  • Number of shelves 5

Performance test

XSD series dry cabinets performance chart
InstrumentVaisala 
Type of dew point sensorVaisala drycap 180M
Accuracy of dew point sensor± 0.2° C at + 20° C (+ 68° F)
Location of sensorIn the direct surrounding of cabinet sensor
Ambient conditionsHumidity 50 ± 5% rH, 25° ± 2°C, Pressure 994 ± 20 hPa
Door openings2 door openings of 15 sec. (average RH 0.70%)

See technical drawings pages for specific performance results

Display

Dry cabinets display
Settings: Menu language options
Nominal humidity value
Nominal humidity value alarm 
Delay humidity alarm (in combination with heater)
Nominal temperature value (in combination with heater)
Temperature alarm (in combination with heater)
Delay temperature alarm
Door alarm 
Interlocking
Manual regeneration
Display:Voltage supply (supplied by Drying Unit) 24 VAC/DC
4 Input function keys (tactile-touch keys)
Display 61 x 33 mm, white, controllable backlight, adjustable contrast
SUB-D plug (“universal” 9-wire standard serial cable)
Power consumption 24 VDC, 40 mA

Drying - U 2000 series

ControlAdjustable with 21 series control panel
Voltage level120 V/60 Hz or 230 V/50 Hz. 
Power consumption35 W/h
Dimensions230 VAC (120 VAC available)
Dimensions (LWH)260 x 380 x 100 mm
Weight:8.1 kg

Rotronic sensor HC2-S

Rotronic sensor HC2A-S

Based on the Airchip 3000 Technology, the HygroClip 2 probes can be used for control of temperature and humidity. The HygroClip 2 probes can be configured with the ROTRONIC HW4 software and share the following features:

  • Measurement of relative humidity and temperature
  • Data recording of up to 2000 relative humidity and temperature value pairs
  • Programmable automatic sensor test with fail safe mode and sensor drift compensation

Moisture Control - N2 (Auto) Flow

Power Supply230 V AC (110 V AC optional)
N2 Connection8 mm hose connection
N2 Pressure1 – 6 bar
N2 Standby- amount0 – 25 L/min
N2 Purge0 – 25 L/min

Heater SH 230-1

Voltage230 V AC (110 V AC optional)
Frequency AC50/60 Hz
Power530 / 780 W
Temperature sensorPTC 100
Thermal protection90 ºC
Temperature range30 -40ºC
Air flow86 M³/H
Display tolerance1 digit at 25ºC
SD+ Series - SD Plus 302-22

SD+ 302-22

Technical Drawings &
Downloads

SD+1104 dry storage cabinet

SD+ 1104-22

Technical Drawings &
Downloads

SD+1106 dry storage cabinet

SD+ 1106-22

Technical Drawings &
Downloads