Reliable & easy to use
The SDB series of Super Dry cabinets from Totech have been designed as low cost entry-level storage cabinets. User-friendly operation and compact construction guarantee safe medium to long term storage storage with low humidity control of less than 5% RH.
Advanced technology in robust design
The SD series of Super Dry cabinets from Totech offer optimal protection with minimal deployment. User-friendly operation and compact construction guarantee safe and reliable dry storage with low humidity control of less than 5% RH.
Economical & precise
The models of the SD+ series of Super Dry cabinets from Totech are upgraded versions of the SD models. They are equipped with high precision sensors and dynamic regeneration of the drying unit. Safe low humidity control of less than 5% RH.
Maximum process safety
The Hyper Super Dry (HSD) Series of desiccant dry cabinets from Totech meets the challenges of humidity on complex MSDs. HSD drying cabinets deliver high accuracy humidity control to RH less than 0.5%, boast recovery times of three minutes or less, and closed loop regeneration that adapts to the load on the cabinet and the frequency of door openings.
Perfection in every detail
The XSD/XSDB/XSDV series of drying cabinets provides the most advanced storage and drying process available including uniform heat up+ to 60°C and ultra low RH less than 0.5% while consuming a tiny fraction of the energy used by conventional methods. Even with frequent door openings, RH level restores within seconds
Long Term Storage
Dry Cabinets that also Cool
The XSDC series helps avoid the problems associated with long term storage – oxidation & intermetallics. A powerful cooling unit lowers the internal temperature of the cabinet to 10°C & high insulation values are ensured by a glazed double-wall & a foam inner body. Totech Monitor enables real time traceability of all cabinet conditions & can send alarm email notifications.
Grows with your demand
A cabinet that grows with your demands, the MSD series is the first modular dry cabinet that can be expanded as your storage & drying needs increase. The basic MSD can be expanded to 4800 liters without need for additional dry units, delivering precise humidity control to less than 0.5% RH with traceability to a computer or network.
Transparency & versatility
The ESDA series is designed with transparency in mind. Developed out of a robust acrylic material, the Super Dry Acrylic (ESDA) Series is engineered to achieve 1-2% RH for reliable, effective humidity control. They come with a large range of options.
Tailor Made Solutions
Walk in Dry Rooms
Based around a robust aluminium construction with an automatic door function, Totech Dry Rooms are custom designed to be used alongside pick and place machines & are engineered to store Component Feeder Reels at 1%RH. All are custom-built to accommodate every type of feeder trolley.
Storage, Floor Life Reset or Both?
Help Me Decide What I Need
Let us advise you of the perfect cabinet for your needs...
Totech Super Dry low humidity desiccant cabinets protect a wide range of products against defects caused by humidity. Designed to exceed IPC/JEDEC J-Std-033C, Super Dry Desiccant Cabinets can dehumidify to less than 0.5% RH. This qualifies them not only for unlimited safe storage, but also means they can safely remove moisture, thus resetting floor life without oxidation, even at ambient temperatures.
High performance drying cabinet
Standard storage cabinet
A critical performance parameter of any desiccant cabinet is Recovery Time. Recovery Time is the ability of the cabinet to return to set point after a door opening. Many cabinets can claim to achieve 3% or 1% RH but the average achieved over the course of one or multiple shifts is affected by the frequency of door openings and the cabinet’s recovery time capability.
Storage and Drying
All devices of the MSL-Classes 2a – 5a can be stored for an indefinite period at a water vapor level less than 1.9 g/m³ (5%RH) per IPC/JEDEC-J-STD- 033C . When more moisture is drawn from the surrounding air, the vapor pressure difference rises such that the water molecules in the components overcome their adhesion force and the moisture is released. The components are thereby dried. The drying speed is strongly dependent on the vapor pressure differential. The lower the pressure in the storage atmosphere, the faster moisture is withdrawn from
the wet components and circuit boards. Super Dry systems achieve an atmosphere of less than 0.5 % RH at room temperature and produce a “moisture vacuum” at a vapor level of less than 0.05 g/m³. This leads to a strong “revertive” drying effect, as the previously assimilated moisture is released. This is very protective of the devices, because they are not subjected to thermal stress and thus prevent oxidation or intermetallic growth. Low temperature Heat (40C-60C) can be added to accelerate the drying time.